Home > Powered Mobility > Wheelchair Ramps > Suitcase & Pathway Ramps >

Roll-A-Ramp 36-Inch Aluminum Modular Ramp With Loop End Handrail On Both Sides
Roll-A-Ramp 36-Inch Aluminum Modular Ramp With Loop End Handrail On Both Sides
Roll-A-Ramp 36-Inch Aluminum Modular Ramp With Loop End Handrail On Both Sides


 
Alternative Views:


Roll-A-Ramp 36-Inch Aluminum Modular Ramp With Loop End Handrail On Both Sides
Our Price: $1,713.94

Price with Selected Options: $1,713.94



Availability:: Usually Ships in 3 to 5 Days
Product Code: RAMP36RAIL

Model Selection



Qty:
Description
 

Roll-A-Ramp 36-Inch Aluminum Modular Ramp With Loop End Handrail On Both Sides

Roll-A-Ramp 36-Inch Aluminum Modular Ramp With Loop End Handrail On Both Side is an excellent alternative to building a permanent wooden ramp and a good option for wheelchairs, walkers, scooters, or any accessibility need. Roll-A-Ramp gives you the versatility of having a portable system at any length. Using platforms (small landings) you can create a ramp that has a 90 degree angle turn. Its unique roll-and-go design makes it the ideal choice when convenience, storage, and trans-portability are key concerns.

Roll-A-Ramp 36-Inch Modular Ramp Features
Includes
  • - One long ramp or multiple shorter ramps
  • - Adjustable Support Stands
  • - Quick Release Pins (6 ft. and longer)
  • - Loop End Handrails (If Applicable)
  • - Platform w/handrails
  • - Support Stands for ramps 11′ and longer (placed at 6′-7′ increments)
Features
  • - Easy set up and take down – or leave in place
  • - Rolls up and is always portable
  • - Lightweight yet extremely sturdy and durable
  • - Can be configured as multiple ramps in one
  • - 10-year unlimited warranty on ramp
More Information
  • Place at least the first two sections of Roll-A-Ramp on the top step and it is ready for use.
  • Roll-A-Ramps unique design makes itideal for threshold, without the need for any added accessories.
Roll-A-Ramp can easily be used to bridge gaps.
  • With our Seg-mount, Roll-A-Ramp can be placed flush with the top step so you can close a door with the ramp in place.
  • Splitting/Joining Ramp Sections withOptional Quick Release Pins
  • Align the two sections in the same way as the rest of the ramp so the holes are aligned.
  • Insert the quick release pin into the hole in the section, ensuring the pin goes through both ramp sections.
  • Insert the cotter pin attached to the end of the wire, push through the hole in the end of the quick release pin, until it fits securely around the body of the quick release pin
Adding or Removing Ramp Sections
  • Use the 3/16” Hex Allen Wrench and a 1/2” wrench or the wrench provided.Align ramp sections - insert bolt through hole - tighten with Allen Wrench andwrench provided or a 1/2” socket.
  • Note: Do NOT fully tighten nut to be able to roll up.
How Long Of A Ramp Should User Buy?
Generally Recommended Slope Angles
  • 4.8-degree - This is Americans With Disabilities Act compliant
  • 7-degree - Manual wheelchair users who are independent or who have an attendant with limited strength
  • 10-degree - Manual wheelchairs with a reasonably strong attendant
  • 12-degree - Power wheelchairs or scooters and manual chairs with a strong attendant
  • 15-degree - Restricted space, unoccupied loading/unloading


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Powered Mobility > Wheelchair Ramps > Suitcase & Pathway Ramps
Wheelchairs, Walkers & Geri Chairs > Wheelchairs > Wheelchair Access Ramps