Drive Pulse Oximeter is FDA Approved
Offers 2 Year Warrantee
Operation of the product is simple and convenient
The product is small in volume, light in weight (total weight is about 50g including batteries) and convenient in carrying
Power consumption of the product is low and the two originally-equipped two AAA batteries can be operated continuously for 30 hours.
Low voltage warning will be indicated in visual window when battery voltage is so low that normal operation of the Oximeter might be influenced.
The product will automatically be powered off when no signal is in the product for longer than 8 seconds.

Product Intended Use:

Fingertip Pulse Oximeter 18705 is a portable non-invasive, spot-check, oxygen saturation of arterial hemoglobin (SpO2) and pulse rate of adult and pediatric patient at home, and hospital (including clinical use in an internist/surgery, Anesthesia, intensive care and etc). Not for continuously monitoring.
The 18705 requires no routine calibration or maintenance other than replacement of batteries.
Includes:

One Lanyard Hand Lace

Two batteries

One instruction manual
Technical Specifications:

Display type: OLED display:

SPO2 display range: 0-99%

PR display range: 30-254 BPM

PR display mode: bar graph

Data update time: < 15 s
LED Wavelengths:

Red: 660nm

Infrared: 940nm 4.3 Battery life Two AAA 1.5V alkaline batteries could be continuously operated as long as 30 hours.

Resolution: ±1% for SPO2 and ±1BPM for Pulse rate

Measurement Accuracy: SPO2: 70%--99%, ±3%; =70% no definition.

PR: 30—235 BPM, ± 2 bpm during the pulse rate range of 30-99 bpm and 2% during the pulse rate range of 100-254 bpm

It is equipped with a function switch, through which the Oximeter can be powered off in case no finger is the Oximeter longer than 8 seconds.

Outline dimension: Length: 58mm Width: 32mm Height: 34mm Weight: 50g (including two AAA batteries)

Environment requirements: Operation Temperature: 5-40? Storage Temperature: -20-70? Humidity : 15%-80% in operation <93% in storage Declaration: EMC of this product comply with IEC60601-1-2 standard.