The
PAL-1000 Portable Pool Lift is a completely portable aquatic lift, it
requires no mounting to the pool deck. This Portable Pool Lift contains
over seven hundred pounds of counter weight to support a lifting
capacity of 300 lbs.
Its padded
handle and ball bearing casters make the PAL easy to move, making it
the perfect fit for facilities requiring accessibility to more than one
water location, as well as for those who wish to store the unit away
when it is not needed.
It is not necessary to sacrifice a swim
lane to mount the unit, which can be conveniently stored when not in
use. The PAL-1000 Portable Pool Lift features a mechanical actuator,
which is the same reliable technology used on hospital beds all over the
world. The actuator is powered by a rechargeable 24-volt battery; a
consistent power source that insures that the PAL-1000 Portable Pool
Lift will work when you need it to work. Every time.
The unique
design of the PAL-1000 Portable Pool Lift allows it to be adaptable to
virtually all swimming pool configurations. Its arms reach over the pool
edge and can vary in length depending upon the amount of required
clearance. The PAL works well with edgeless designs, as well as with
pools with curbs, gutters and skimmers. Either the user or attendant can
operate the PAL-1000 Portable Pool Lift with ease. The unique design of
the seat was specifically engineered for people with disabilities. The
seat is deep enough to provide stability and has no edge to facilitate
transfers. The controls on the waterproof hand pendant are easy to
understand and operate. Set-up consists of rolling the lift into place
along the edge of the pool and locking the wheels. Pricing includes a
footrest. Battery included.
The PAL Portable pool lift is available in the following models:
PAL 1000 – Standard portable aquatic lift is the perfect lift solution for facilities wishing to service more than one pool
Pal Hi/Lo –A variation of the PAL designed for in facilities that have both in-ground pools and above ground spas
PAL Spa –Designed for above ground pools and for above ground spas up to 52” above the deck
Technical:
- Lifting Capacity: 300 lb
- Lifting: Linak LA32 Mechanical Actuator
- Max. Thrust: 1680 lb
- Voltage: 24 VDC Max. Amp: 9
- Max. Speed: 0.59 inch/sec.
- Rotation: ITT SWMK 403.033 24 VDC 13 RPM
- Gearing Ratio 9:1
- Power: Linak Battery Pack BAJ1 24 VDC, IP65 Gel Lead Acid
Materials & Finish:
-
Arms: Powder Coated Aluminum
-
Mast: Powder Coated, Zinc Plated Steel
-
Handle: Powder Coated Aluminum
Housing: Vacuum Formed ABS Plastic
Casters:
Front: Tente 8477 Precision Ball Bearing, Stainless Steel, 5" total lock swivel
Rear: Tente 5328 Precision Ball Bearing, Stainless Steel, 5" fixed Polyurethane Tread
Dimensions:
Overall Length (foot print): 85-91" fully extended, 66" in stored position
NOTE: Since pools and spas vary, after you place your order you may be contacted by our representative to provide some measurements for your pool/spa. Manufacturer will configure the lift to match your specific poolside configurations.
TECHNICAL CHARACTERISTICS:
Lifting Capacity: 300 lb
Lifting: Linak LA34 Mechanical Actuator
Max. Thrust: 1680 lb
Voltage: 24 VDC
Max. Amp: 9
Max. Speed: 0.59 inch/sec.
Rotation: ITT SWMK 403.033 24 VDC 13 RPM
Gearing Ratio 9:1
Power: Linak Battery Pack BAJ1 24 VDC, IP65 Gel Lead Acid
MATERIALS & FINISH:
Arms: Powder Coated Aluminum
Mast: Powder Coated, Stainless Steel
Handle: Powder Coated Aluminum
Housing: Vacuum Formed ABS Plastic
CASTERS:
Front: Tente 8477 Precision Ball Bearing, Stainless Steel, 5" total lock swivel
Rear: Tente 5328 Precision Ball Bearing, Stainless Steel, 5" fixed Polyurethane Tread
DIMENSIONS:
Weight: 850 lb
Overall Height: 72. in
Base Height: 23.5 in
Base Length: 36 in
Base Width: 29.25 in
Clearance: 1.25" with stabilizer, 2" without stabilizer
Overall Length (foot print): 81.5 fully extended w/o footrest, 95.5" with footrest, 55" in stored position
WARRANTY:
Electronic components: One Year
Frame: Lifetime
|
