The AIRHAWK Cruiser Motorcycle Seat Cushion provides the gift of longer, more comfortable rides. Fits most passenger seats of Sport Touring, Sport, Dual Sport, Standards and Non-Touring (Harleys) bikes.

Unsurpassed Comfort
The last mile feels like the first, thanks to AIRHAWK® exclusive
Shape Fitting Technology®. Patented system eliminates painful pressure points and promotes consistent blood flow for a longer,
more comfortable ride. Memory foam and Gel seats can not do it.
Only genuine AIRHAWK can. And it's fully customizable and portable. Use it on any bike, for any rider.

Premium Quality
Every AIRHAWK Cruiser Motorcycle Seat Cushion is handcrafted from soft, pliable, non-hardening neoprene and features a breathable, stretchable outer cover with a non-skid bottom, as well as tie-down straps. It'll stay where you put it.

No Hot Seat
Open mesh side panels allow air to circulate between the air cells and out the side of the cushion, reducing heat build-up and keeping you cool and dry. The cushion is waterproof, and the cover material is made of quick-dry material, just in case it gets rained on.

More Comfort in the End
Small interconnected air cells evenly distribute your weight and pressure over the whole cushion, reducing the "hot spots" that cause pain. The air cells also work as mini shock absorbers, reducing vibration. Once you've tried it, you won't ride without it.

For the AIRHAWK Seating system to be effective, it must be properly adjusted. The goal is to allow yourself to sink as deeply as possible into the seating system without hitting the bottom. This is achieved by having as little air in the seating system as possible. Proper adjustment can only be done while you are sitting on the seating system.

Step 1: Turn seating system valve counter-clockwise to open.

Step 2: Inflate seating system by mouth until the seating system is filled with air.

Step 3: Turn valve clockwise to close.

Step 4: Place seating system on your motorcycle, with the air cells facing upward. Sit on the seat in your normal riding position. Place both feet on pegs.

Step 5: IMPORTANT! Adjust the air by opening the fill valve and releasing air until you sink down into the seating system. Close fill valve. Ideal inflation is about 1/2 inch off the seat. If you bottom out on the base of the seat, add more air through the fill valve and adjust again. DO NOT OVERINFLATE. This product works most effectively with a minimal amount of air.

Step 6: Turn valve clockwise to close. You can check that you have not let all the air out of the seating system by slowly leaning your body (not necessarily your bike) from side to side. You should be able to feel the air transferring beneath you slightly. If too much air is transferring beneath you, let more air out of the seating system.