Full-Electric Hospital Bed versus Semi-Electric Hospital beds:
Full-Electric bed:
Head, foot, and bed height is adjustable via the hand control. The
full-electric bed has an additional motor for raising/lowering bed
height.
Semi-Electric bed:
Head and foot are adjustable with the hand control, the bed can be
raised/lowered, but with a manual handcrank (this usually set to a good
height for the patient and left at that position).
HI- Low Hospital Bed- Are used for patient that suffer from falls and disorientation at night, the bed lowers to just inches above the floor. at night. And raises to standard height for ease of use
Manual Hospital Bed - Head and foot are both adjustable, however a crank is required to operate the bed
1)The convenience for both the caretaker and the patient makes the price difference insignificant.
2)Easier for patient to get into or out of bed by using simple hand pendant control.
3)Patient may want the bed low to the ground while sleeping, and higher for getting up and out of the bed.
**Please Note: That both the Semi Electric & the Full Electric beds can be operated by a hand crank in the event of power failure. The Handcrank is included with each bed
|
|
|
