Prairie View Industries Multifold Reach Ramp - Medical Department Store
Prairie View Industries Multifold Reach Ramp - Medical Department Store
Prairie View Industries Multifold Reach Ramp - Medical Department Store
Prairie View Industries Multifold Reach Ramp - Medical Department Store
Prairie View Industries Multifold Reach Ramp - Medical Department Store
Prairie View Industries Multifold Reach Ramp - Medical Department Store

PVI Multifold Reach Ramp — 6', 7' & 8' | 800 lb Capacity | Portable Van & SUV Ramp | Made in the USA

  • Available in 6', 7', and 8' lengths
  • Extended hook spans the distance from bumper to vehicle interior
  • Seperates into two pieces for easy transport
Our Price: $570.00

PVI Multifold Reach Ramp — 6', 7' & 8' | 800 lb Capacity | Portable Van & SUV Ramp | Made in the USA

image
image
Description

The PVI Multifold Reach Ramp is a portable, suitcase-style van ramp that loads power wheelchairs and mobility scooters into vans and SUVs — no permanent installation, no tools, no second person required. It goes anywhere you go and sets up in seconds.

The key difference between this ramp and a standard multifold ramp is the extended reach hook at the top — a transition plate designed specifically to clear the bumper and rear door seal of a van or SUV, bridging the gap between the vehicle's edge and the cargo floor without damaging the bumper or door seal. For anyone loading a power chair or scooter into the rear of a full-size van or SUV regularly, that extended hook makes the difference between a ramp that works cleanly and one that catches, scrapes, or requires repositioning every time.

800 lb capacity. 30 inches wide. Made in the USA by Prairie View Industries and tested to a 3× safety factor. Available in 6, 7, and 8 foot lengths — choose based on your vehicle's floor height and the slope you are comfortable navigating.

Not sure which length is right for your vehicle? Call 866-218-0902 — our mobility specialists will help you choose before you order.


What Makes the Reach Ramp Different

Extended Reach Hook — Clears the Bumper

Standard portable ramps rest on the bumper — which creates a transition bump and can scratch or damage the vehicle over time. The Multifold Reach Ramp's extended hook is specifically engineered to span the distance from the bumper to the van's cargo floor, so the ramp surface connects directly to the vehicle interior without resting on the bumper. The result is a smooth, continuous loading surface with no bump at the transition point and no bumper damage from repeated use.

Folds Like a Suitcase — Separates Into Two Pieces

The ramp folds in half for compact suitcase-style carrying and storage. It can also be separated into two individual pieces — each light enough to carry comfortably in one hand — for situations where even the folded unit is awkward to manage alone. Steel security pins lock the two halves together during use and release quickly for separation. This two-piece design is the feature most caregivers and family members point to as the reason this ramp is manageable for solo operation.

Patented Pinch-Point Free Hinge

The center hinge uses PVI's patented design that eliminates the pinch points created by standard fold-over hinges. Important for fingers during setup and takedown, and for wheelchair and scooter tires crossing the fold point during loading.

Safe Slope Indicator

An attached safety guide indicates when the ramp angle is within safe operating range. Slope is determined by your vehicle's floor height and the ramp length — the indicator takes the guesswork out of confirming you have the right setup before loading.

30-Inch Wide Platform

At 30 inches wide, this ramp accommodates wheelchairs and scooters with various wheel configurations including wider bariatric models. Three inches wider than the rear door van ramp, which matters for larger equipment.


Choose Your Length — 6', 7', or 8'

All three lengths are 30 inches wide with the same 800 lb capacity. The difference is slope — a longer ramp creates a shallower angle, which is easier on mobility device motors and more comfortable for manual chair users. Choose based on your vehicle's floor height and how steep a slope you can comfortably navigate.

General guideline: The higher your van or SUV floor sits off the ground, the longer the ramp you need to keep the slope manageable. When in doubt, go longer — a shallower slope is always easier and safer than a steeper one.

6 Foot (UTW630)

Lightest · Most compact · Best for lower floor vehicles · Maximum 16" rise

The 6-foot is the lightest and most compact option — easiest to carry, easiest to store, smallest folded footprint. Best suited for vans and SUVs with a lower floor height where a shorter ramp still produces a manageable slope. If your vehicle has a relatively low cargo floor and portability is the priority, start here.

  • Length: 6 feet (72 inches)
  • Width: 30 inches
  • Weight: 41 lbs
  • Folded size: 38¼" × 16" × 10¾"
  • Capacity: 400 lbs single axle / 800 lbs two axles
  • Model: UTW630

7 Foot (UTW730)

Best all-around length · Standard full-size van · Shallower slope than 6' · Most popular

The 7-foot is the most commonly chosen length for standard full-size vans — it creates a shallower slope than the 6-foot while remaining manageable to fold, carry, and store. For most full-size vans with a standard floor height, the 7-foot hits the right balance between slope and portability. This is the length we recommend most often when a customer is unsure.

  • Length: 7 feet (84 inches)
  • Width: 30 inches
  • Weight: 46 lbs
  • Folded size: 44¼" × 16" × 10¾"
  • Capacity: 400 lbs single axle / 800 lbs two axles
  • Model: UTW730

8 Foot (UTW830)

Shallowest slope · Higher floor vehicles · Maximum rise 16" · Best for power chairs

The 8-foot creates the shallowest slope of the three lengths — the easiest on motors, the most comfortable for manual chair users, and the right choice when the vehicle floor is higher than average. For full-size high-roof vans, larger SUVs, or power chair users who want the most gradual incline possible, the 8-foot is the answer. It is the heaviest and largest folded, but the slope advantage is real and meaningful for daily use.

  • Length: 8 feet (96 inches)
  • Width: 30 inches
  • Weight: 52 lbs
  • Folded size: 50¾" × 16" × 11"
  • Capacity: 400 lbs single axle / 800 lbs two axles
  • Model: UTW830

Length Comparison at a Glance

Spec 6 Foot (UTW630) 7 Foot (UTW730) 8 Foot (UTW830)
Ramp Length 6 feet 7 feet 8 feet
Ramp Width 30 inches 30 inches 30 inches
Ramp Weight 41 lbs 46 lbs 52 lbs
Folded Size 38¼" × 16" × 10¾" 44¼" × 16" × 10¾" 50¾" × 16" × 11"
Capacity 800 lbs (two axles) 800 lbs (two axles) 800 lbs (two axles)
Slope Steepest Middle Shallowest
Best For Lower floor vehicles, portability priority Standard full-size vans — most popular Higher floors, power chairs, easiest loading
Model Number UTW630 UTW730 UTW830

Key Features

  • 800 lb capacity — 400 lbs single axle / 800 lbs two axles — handles power wheelchairs, scooters, and bariatric equipment
  • Extended reach hook — spans bumper to cargo floor without resting on or damaging the bumper
  • Folds in half — suitcase style — compact folded profile for storage in the vehicle or at home
  • Separates into two pieces — steel security pins release quickly for two lightweight halves when needed
  • 30-inch wide platform — accommodates wheelchairs and scooters with various wheel configurations
  • Patented pinch-point free hinge — safer for fingers and wheelchair tires at the fold point
  • Safe slope indicator — attached guide confirms safe angle before loading
  • Anti-slip high traction surface — secure grip in wet and dry conditions
  • No permanent installation — no drilling, no mounting hardware required
  • Tested to 3× safety factor — PVI engineering standard
  • Made in the USA by Prairie View Industries
  • Limited Lifetime Warranty
  • Includes steel security pins and safety video

Full Specifications

Manufacturer Prairie View Industries (PVI)
Models UTW630 (6') · UTW730 (7') · UTW830 (8')
Weight Capacity 400 lbs single axle · 800 lbs two axles
Ramp Width 30 inches — all lengths
Maximum Rise 16 inches
Frame Material Lightweight welded aluminum
Surface Anti-slip high traction tape
Operation Portable — no installation required
Folding Folds in half (suitcase style) · Separates into two pieces
Security Steel security pins included
Safety Testing Tested to 3× safety factor · Listed by Underwriters Laboratories
Country of Origin Made in the USA
Warranty Limited Lifetime Warranty
Included Steel security pins · Safety video

Need Help Choosing the Right Length?

Call us with your vehicle make, model, and year — we will confirm which length is right for your van or SUV's floor height before you order. Visit any of our five Southwest Florida showrooms for an in-person consultation.

Venice 1180 Jacaranda Blvd 941-497-2273
Sarasota 3672 Webber St 941-923-7556
Port Charlotte 4265 Tamiami Trail 941-743-6644
Fort Myers 8595 College Pkwy 239-482-6111
Naples 13030 Livingston Rd 239-529-2242

Nationwide shipping available. Call 866-218-0902 — Monday–Friday 9AM–5PM | Saturday 9AM–3PM

Technical Specs
Specifications

Specifications for the Multifold Reach Ramp

Ramp Width: 30"
Ramp Lengths: 6 feet
7 feet
8 feet
10 feet
Ramp Weight Capacity: 800
Folded Width: 16.00 in.
6' Product Weight: 36 lbs.
7' Product Weight: 41 lbs.
8' Product Weight: 52 lbs.
10' Product Weight: 63 lbs.
Logo 1
Logo 2
Logo 3
Logo 4
Logo 5