Chattanooga Hydrocollator E-1 Stationary Heating Unit
Chattanooga Hydrocollator E-1 Stationary Heating Unit
Our Price: $679.97
/
Description
Chattanooga Hydrocollator E-1 Stationary Heating Unit
Chattanooga Hydrocollator E-1 Stationary Heating Unit is a benchmark against which all other heating units are judged. Durable and easy to maintain, these high quality stainless steel units ensure a constant supply of temperature consistent HotPacs. It is just the right size for small clinics and departments where oversize HotPacs are not needed. The E-1 Hydrocollator fits on a desktop, countertop. or mobile stand.Features
- Chattanooga Hydrocollator E-1 Stationary Heating Unit is simple to fill and drain
- Thermostatically controlled temperature
- No plumbing is required
- More Information
- - The thermostat is extremely sensitive and the slightest adjustment will alter the temperature several degrees
- - The recommended operating temperature is 160°F to 166°F (71°C to 74°C)
- - The temperature of the water should be checked with a thermometer after every adjustment, before using the HotPacs
- - Always keep the water level over the top of the HotPacs to avoid burning or scorching of the packs
- - Never allow the HotPacs to dry after use
- - Check water level daily as it has a natural loss due to evaporation
- - Do not move the Hydrocollator while filled with water
- - Tipping over could result in burns to the user or others
- - Always unplug the Hydrocollator from the power source before attempting to empty water from unit
- - Make certain the unit is electrically grounded by plugging into a hospital grade electrical outlet with a ground terminal receptacle (U-ground outlet), 120 VAC only
- - Always replace Hydrocollator HotPacs as soon as they show signs of wear
Technical Specs
Specifications
Specification
| Particulars | Details |
| Mains Power | 110 to 120 V, 50/60 Hz |
| Power Consumption | 1000W |
| Dimensions | 13"L x 8"W x 16"H (33cm x 20cm x 41cm) |
| Tank Capacity | 4.1 gallon (15.44L) |
| Temperature Range | 160°F to 165°F (71°C to 74°C) |
| Thermal Cut-Out Temperature | 180° to 185°F / 82° to 85°C |
| Accuracy | +/-10% |
| Heat Up Time to 160°F ( 70°C) | 2 hour |
| Cool Down Time from 160°F (70° C) | 1 hour |
| Fiberglass Insulation | No |
