Pride Go-Go Elite Traveller & Ultra X 12Ah Battery Box

Part Numbers: BATASMB1028 / PLSASMB2013  |  By Pride Mobility

12Ah Replacement Battery Box  |  Fits Elite Traveller & Ultra X  |  Housing, Wiring, Breaker & 2 Batteries Included  |  Drop-In Installation  |  ~9-Mile Range  |  By Pride Mobility

OEM replacement 12Ah battery box for the Pride Go-Go Elite Traveller and Go-Go Ultra X mobility scooters — a complete assembly that drops into the existing battery bay with no tools required. Includes the battery pack housing, complete wiring harness, circuit breaker, and two new 12V 12Ah SLA/AGM batteries installed and ready to use. Restores full original range of approximately 9 miles per charge. This is the standard 12Ah configuration that ships with the Go-Go Elite Traveller and Ultra X — the direct OEM-specification replacement when the existing battery box has reached end of service life, been physically damaged, or is no longer holding a useful charge. Also used as a spare battery box for users who extend their range by swapping a fully charged second pack. Compatibility note: does not fit the SC40U or SC44U (Go-Go Ultra body) — those models require BATASMB1017. Does not fit the Go-Go Elite Traveller 2 (SC402E / SC442E) — those require the 18Ah box BATASMB1029.

Compatible Scooter Models

Not sure which model you have? The model number is on a Pride label on the black seat post or under the battery pack. Call us if you need help: 1-866-218-0902

Specifications

Need the higher-capacity 18Ah upgrade box for the Elite Traveller? See BATASMB1029. Need the battery box for the Go-Go Ultra SC40U/SC44U? See BATASMB1017.

Key Features

• Complete drop-in assembly — housing, wiring harness, circuit breaker, and two batteries all pre-installed; no tools or assembly required, no separate battery purchase needed
• Fits both the Elite Traveller and the Ultra X — the 12Ah box is the only Pride battery box compatible with both the SC40E/SC44E and SC40X/SC44X; the 18Ah upgrade box is only compatible with the Elite Traveller series
• OEM-specification replacement — same 12Ah capacity and battery chemistry as the factory-original configuration; restores the scooter to original-as-delivered performance
• ~9-mile range per charge — range will vary with rider weight, terrain, speed, and battery condition; these figures reflect the standard range under typical use conditions
• SLA/AGM sealed battery chemistry — spill-proof and maintenance-free; no fluid checks or ventilation requirements; same chemistry as original Pride Mobility OEM batteries
• Usable as a spare battery for extended trips — the battery box swaps in seconds without tools; users who need more than 9 miles can carry a second fully charged battery box and swap mid-trip rather than waiting for a charge
• Circuit breaker included — protects the scooter's electrical system during installation and operation

Clinical FAQs

What is the difference between the 12Ah box (BATASMB1028) and the 18Ah box (BATASMB1029), and which does my scooter need?

These are two physically different battery box assemblies with different capacities that fit overlapping but not identical scooter models. The 12Ah box (BATASMB1028, this product) fits the Go-Go Elite Traveller (SC40E/SC44E) and the Go-Go Ultra X (SC40X/SC44X), delivering approximately 9 miles of range per charge. The 18Ah box (BATASMB1029) fits the Go-Go Elite Traveller series only — it is not compatible with the Ultra X — and provides higher capacity for extended range. Because the Elite Traveller was manufactured in both 12Ah and 18Ah configurations at different production periods, Elite Traveller owners must check which battery box their specific unit shipped with before ordering a replacement. The simplest method: look at the existing battery box for a Pride part number label (BATASMB1028 = 12Ah, BATASMB1029 = 18Ah), or check the amp hour rating printed on the installed batteries. Go-Go Ultra X owners always need the 12Ah box (BATASMB1028) — the 18Ah box is not compatible with the Ultra X body. If you are unsure which box your scooter uses, call us at 1-866-218-0902 with your scooter's serial number and we will confirm the correct replacement before you order.

Can I use a second battery box as a spare to extend my range, and how does the swap work?

Yes — this is one of the Go-Go platform's practical advantages. The battery box is designed for tool-free removal and installation: a latch or release mechanism unlocks the box from the scooter body, the box slides or lifts out, and a fully charged replacement box drops in and locks into place in seconds. For users who routinely travel further than a single battery charge allows — full-day outings, travel days through airports, shopping trips that exceed the 9-mile range — carrying a second fully charged battery box in a bag, scooter basket, or vehicle allows mid-trip range extension without finding an outlet. The second box can be charged at home before departure using the standard charger. For travel use specifically, having a spare charged box eliminates the range anxiety that comes with a single 9-mile battery, since the total available range doubles. Both boxes can be charged from the same charger between uses. Note that a second battery box adds approximately 35 lbs of carry weight, so the logistics of transporting the spare need to be considered — most users store the spare in the vehicle and swap at the car rather than carrying it on the scooter throughout the day.

How do I know when the battery box needs replacing versus just the batteries?

SLA/AGM batteries in mobility scooters typically last 1 to 2 years under regular use — range decline is the primary indicator that service life is ending. If the scooter previously provided close to 9 miles per charge and now delivers significantly less despite full charging, the batteries are the most likely cause. If the box housing and all electrical components (wiring, breaker, connectors) are in good physical condition, purchasing replacement 12V 12Ah SLA batteries separately and installing them in the existing housing is the more economical repair — the box itself lasts considerably longer than the batteries. The full assembly replacement (BATASMB1028 with batteries pre-installed) is the appropriate choice when: the box housing is cracked, corroded, or physically damaged; the internal wiring shows corrosion or damage at the connectors; the circuit breaker has failed; or when you want a direct drop-in repair without separately sourcing batteries and handling installation. If the scooter shows intermittent power loss, fails to charge normally, or displays error indicators beyond simple range decline, the issue may be in the scooter's charger or electronics rather than the battery box — call our team at 1-866-218-0902 to walk through the symptoms before ordering parts.

Questions about battery box compatibility, 12Ah vs. 18Ah selection, or diagnosing your scooter's battery issue? Call our product specialists: 1-866-218-0902  |  Mon–Fri 9am–5pm, Sat 9am–3pm EST