Roll-A-Ramp Manual Bi-Fold Van Ramp — 26", 30" & 36" Wide | 1,000 lb Capacity | Minivan & Full-Size Van

The Roll-A-Ramp Manual Bi-Fold System is the affordable, no-conversion van ramp solution for wheelchair and scooter users — mounts permanently to your existing van's floor, folds up inside the door when not in use, and supports an extraordinary 1,000 lbs. No hydraulics. Nothing to fail. Nothing to maintain.

A full van conversion — lowered floor, built-in ramp — costs $15,000–$30,000 and requires buying a specific vehicle. The Roll-A-Ramp Bi-Fold System costs a fraction of that, installs into the van you already own, and does the same job every day without the complexity of powered systems. When something mechanical can fail, it will eventually fail. The Roll-A-Ramp manual system eliminates that variable entirely.

Built from 6061 aerospace-grade aluminum with T6 Rockwell hardness — the same material used in aircraft construction. It will not rust, corrode, or degrade in Southwest Florida's salt air and humidity. Backed by a full 10-year unconditional warranty — the longest warranty in the van ramp category by a significant margin.

Available in three widths — 26", 30", and 36" — for minivans and full-size vans. Van Mounting Brackets are included with every system.

Important: Compatibility evaluation is required before ordering. Call us with your van make, model, and year before purchasing — we will confirm fit and which width is right for your door opening: 866-218-0902

How It Works

The ramp mounts permanently to the van floor just inside the side door using the included mounting bracket system. When you need to load or unload, one person unfolds the ramp out through the door opening to the ground — no lifting of a separate ramp unit, no positioning, no alignment. When finished, fold the ramp back up inside the door. It stores upright within the door opening, taking up approximately 10 inches of depth — the door still closes fully with the ramp stowed.

The slotted ramp surface with built-in raised ridges provides extreme traction in every condition — wet pavement, dust, Florida rain — without grip tape that wears out or surfaces that degrade over time. Built-in side rails on each section keep wheels tracking safely on the ramp surface during loading and unloading.

Choose Your Model — Width and Length

Width is determined by your van's door opening. Length determines the slope — a longer ramp creates a shallower angle, which is easier on mobility device motors and more manageable for users. Do not order without confirming your door dimensions — call us first: 866-218-0902

All Models at a Glance

Optional Accessories

Van Mounting Brackets — Included

The standard van mounting bracket system is included with every ramp. The two-piece bracket bolts to the van floor inside the door opening and can be split into two pieces using the quick-release pins for easier positioning during installation. The standard bracket includes a 6" foldaway plate; an extended 9.75" plate version is available for vehicles that need additional clearance.

3415 Pickup Tailgate Bracket Pair — +$60

For loading wheelchairs or scooters into pickup truck beds via the tailgate. The bracket pair mounts to any flat surface and positions the ramp securely for rear-entry pickup truck loading.

3150 Seg Mount Bracket Pair — +$40

For securing the ramp to a landing, porch, or other fixed structure. Extends the Roll-A-Ramp system beyond van use to home entry applications.

Key Features

• 1,000 lb capacity — handles power wheelchairs, mobility scooters, and bariatric equipment
• No van conversion required — installs into your existing van without lowering the floor
• No hydraulics — nothing mechanical to fail, nothing to service or repair
• Bi-fold design — stores upright inside door opening, approximately 10" depth when stowed
• Extreme traction surface — slotted design with raised ridges grips in wet, dry, and dusty conditions
• Built-in side rails — keeps wheels tracking safely during loading and unloading
• 6061 aerospace aluminum — T6 Rockwell hardness, will not rust or corrode
• German-engineered gas struts — reduce deployment effort by 40%
• Works side or rear entry — versatile installation for various van configurations
• Van Mounting Brackets included — quick-release pins for easy removal when full door clearance needed
• Qualifies for auto manufacturer mobility rebates — contact your dealer for details
• Made in the USA by Roll-A-Ramp
• 10-Year Unconditional Warranty — longest in the van ramp category

Vehicle Compatibility

A complete listing of compatible vehicles is not possible due to the frequency of van model changes year to year. Measuring your door opening before ordering is essential. The minimum requirements vary by model width — call us with your vehicle make, model, and year before ordering and we will confirm compatibility:

MF-26 (26" wide) minimum door requirements: 27.5" wide × 36" high
MF-30 and MF-36: Call to confirm — requirements vary by door configuration

Note for Dodge/Chrysler minivans 2014–present: Special compatibility considerations apply — call us before ordering: 866-218-0902

Note for Honda applications: Please call for Honda-specific compatibility: 866-218-0902

Full Specifications

Questions? We Install and Service in Southwest Florida

The Roll-A-Ramp Bi-Fold System requires professional installation for correct fit and safe operation. Call us before ordering — we will confirm compatibility with your vehicle and discuss installation at our Southwest Florida locations.

Nationwide shipping available. Call 866-218-0902 — Monday–Friday 9AM–5PM | Saturday 9AM–3PM